UPGRADING A 1.X, 2.X OR 3.0 SYNC UNIT TO 3.2, 3.3 OR 3.4 WILL MAKE IT IMPOSSIBLE* TO GO BACK TO AN OLDER VERSION, DO NOT COME COMPLAINING TO CYANLABS ASKING FOR HELP TO GO BACK TO 3.0
* it's possible with hardware flashing but this is out of the scopes of most users and these guides.
So we have confirmed we have SYNC 3 and configured Syn3 Updater correctly, now we can get started on the actual upgrade process.
You will see a detailed overview of your current configuration at the top of the page, always make sure this is correct before preparing your USB
If the current version is incorrect Syn3 Updater may not be able to create a working USB, use the settings menu to update it
Just below the "Current Configuration" you will be asked to select a USB drive. Select a USB drive which has the required amount of storage space, Refer to the table below or the in-app advice.
|Region||Navigation Variants||Non Navigation Variants|
|Europe||32GB USB Drive||8GB USB Drive|
North America & Canada
|16GB USB Drive||8GB USB Drive|
|China||??GB USB Drive||8GB USB Drive|
|Australia & New Zealand||16GB USB Drive||8GB USB Drive|
|Rest Of World||16GB USB Drive||8GB USB Drive|
You can also select a folder instead of a USB drive however for basic use we would recommend just selecting a USB Drive.
Once you have selected your USB Drive move on to "New Version". Select your new region, we would highly recommend you keep the same region as your current region however it is theoretically possible to change this if you modify you AsBuilt also.
Once you have selected your region the "Version" dropdown will be populated with versions, select your desired SYNC version.
You will see a list has appeared under "Select Packages", here you can manually deselect some packages that you may not need, for most users it is recommended you leave this as is and simply press Start
You will see your install mode at the bottom left, if your install fails it's likely this is incorrect! for pre 3.0 SYNC 3 to 3.4 you need reformat, if this hasn't been automatically selected you likely set your current sync version incorrectly.
After pressing "Start" you will be asked a few questions, make sure to answer them correctly as incorrect answers could result in minor or major issues!
The first question you will be asked is this
it's important to answer this one 100% correctly as if you have a car manufacturer 2020 or newer you may have a MY20 APIM and if you answer this incorrectly and you do have one, you WILL brick your SYNC.
If your car is 100% not manufactured in 2020 and you have not retrofitted the SYNC you are safe to click "No" otherwise if you are unsure click "Yes"
If you clicked "Yes" you will now be prompted to create a Interrogator Log USB
Follow the on-screen steps and insert the USB Drive in to your car, wait for the car to reboot or say install complete and remove the USB Drive from your car, Insert the USB Drive back in to the computer and press "OK".
On the newly opened file dialog browse to your USB Drive, then SyncMyRide and then select the SYNC....xml file
You will now be told if your SYNC is MY20 or not!
If you are told your SYNC APIM is not MY20 click "Start" once more and continue below to the "Clicked No? / Not MY20" section
If you are told your SYNC APIM is MY20 displayed in red to be clear, you will only be able to install items via AutoInstall mode and Syn3 Updater will enforce this, We recommend that if you are MY20 that you install your Release and Map Release separately as this has a higher success rate.
Clicked No? / Not MY20
If you have clicked "No" or already ran the above process and been told your APIM is not MY20 then you will now begin download and copying of your desired release
Here you will see a bunch of files in the Queue and the progress bar will slowly progress as the files are downloaded and validated, if the download or validation fails 3 times the process will be aborted.
Once the downloads have completed and the files have been validated, they will be copied to the USB drive automatically.
You can see a detailed log of what the application is doing at the bottom of the window.